NEO20S Lifting Hook
We’ve made the NEO20S 15mm slimmer, (by rearranging the position of its motor), and this has given the NEO20S an additional 60mm in height clerance. This is ideal when the lifting point has a very narrow opening and its contact point is lower than usual. With its 20,000 kgs. (44,092 lbs.) lifting capacity, it is ideal for oversized lifting points of up to 100mm (Ø)
- Ideal for oversized lifting points (up to 100mm Ø)
- Remote engage and release of load
- Fail-safe Design: Impossible to drop a suspended load
- Safety factor of 4:1
Specifications
Swivel with Bearings
The bearings allow the NEO20S lifting hook to rotate freely.
If required, the swivel can be set in a fixed position.
LED Status Indicator *
The High-Brightness LED status indicator is an additional safety measure which shows the lifting hook’s status at all times with a bright 4 colour colour-code scheme visible from the operator’s position. The pulse of the LED status indicator takes an intermittent
pattern after 10 seconds in order to save battery.
Green: Lifting Hook is Open / Release Load
Red: Intermediate: Do Not Lift!
Blue: Lifting Hook is Closed / Lift & Manoeuvre Load
White: Low Battery
* This feature is optional
Smart Battery
With the high-capacity battery, a simple 3 hour charge allows for
more than 3.000 cycles or over 250 hours in standby mode.
By means of the eMAX remote control, the electronics of the lifting hook
can be configured so that when the battery charge is below
a preset threshold by the user, the hook can only be opened.
With this threshold, even is the battery is almost discharged,
you will always be able to open the lifting hook and release the load.
Load Cell *
The NEO20S carries a precise load cell.
It is fully integrated into the lifting hook, representing
no increase in weight or dimensions of the unit.
With the load cell, and should there be a suspended load on the hook,
the intermittence of the LED status indicator’s pulse is of higher frequency.
* This feature is optional
Autoclose Mode *
A contact sensor detects when the hook is closed,
and NEO20S closes automatically.
Laser Pointer
As an optional feature, the NEO20S carries a Laser Pointer.
It acts as a guide to perfectly place and set the lifting hook
in the correct position when approaching the lifting point.
To activate it, simply press the button beside the battery slot.
* This feature is optional
Remote Controlled
Simply open and close the automatic crane hooks or receive real-time information of weight, battery level, and other values of the lifting and manoeuvring operation.
Just like our NEO20 and NEO50 lifting hooks and C5 and eTrack lifting clamps, the automatic crane hook can be paired to the eMAX, eMINI and/or eINST installable remote controls.
Fail-safe Designed
Just like the rest of the NEO range of lifting hooks,
(and all of our lifting products for that matter)
the NEO20S lifting hook is designed under a
fail-safe principle that makes it impossible to drop a suspended load.
Regulatory Standards
Our NEO20S lifting hook certifies with the following regulatory standards:
| ASME B30.20-2010 | ETSI EN 303 446-1 V1.1.0 | UNE-EN 607301:2013 |
| ASME BTH-1-2017 | ETSI EN 303 446-2 V1.1.0 | UNE-EN 61000-6-4:2007 |
| EN 10204 3.1.B | UNE-EN 1050 | UNE-EN 61000-6-2:2006 |
| ETSI EN 300 220-1 V3.1.1 | UNE-EN 13135:2013 | UNE-EN ISO12100:2012 |
| ETSI EN 300 220-2 V3.1.1 | UNE-EN 602041:2007 |
Directive on Machine Safety (D2006/42/EC).
EMC Directive (2014/30/EU).
Low Voltage Directive (2014/35/EU).
Radio Equipment Directive (2014/53/EU).
Assurance of Production Quality in accordance with ISO9001.
ARIB Construction Design Certification Number 203-JN0689.
FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.
Each mechanism is delivered with the CE stamp and a declaration of CE conformity.
elebia is a member of F.E.M. (European Federation of Materials Handling).
