C5 & C6 Automatic Lifting Clamps
The C5 & C6 automatic horizontal lifting clamps are ideal for lifting and moving steel plates, beams or pipes in a secure and safe manner, minimising risks, enhancing safety and increasing productivity in lifting operations.
- 5,000 kgs./11,023 lbs. lifting capacity and a safety factor of 4:1 (C5)
- 6,000 kgs./13,227 lbs. lifting capacity and a safety factor of 3:1 (C6)
- The life span of the C6 automatic lifting clamp is limited to 20,000 lifts. (UNE-EN-13155)
- Roller for Chains
- Hand grip that can be used as a second lifting point
- High-Brightness LED Status Indicator
- Remote engage and release of load
- Fail-safe Design: Impossible to drop a suspended load
Main Specs of the C5 & C6 Lifting Clamps
C5 & C6 Specifications
Once the automatic clamps are fixed to the load that is being lifted, the automated process takes over. The crane driver/operator ensures by using the eMAX remote control that the lifting clamps are all in the same position before every lift. This information is relayed in real time and should there be any difference in the clamp’s states, the remote control informs the crane operator immediately. Once all clamps are confirmed ready, the lifting operation can commence.
LED Status Indicator *
The High-Brightness LED status indicator is an additional safety measure that indicates the Lifting Clamp’s status at all times. With this feature operators receive visual confirmation that the automatic release clamp is working properly.
Green: Unlocked / Release Load
Red: Intermediate: Do Not Lift!
Blue: Locked / Lift Load
White: Low Battery
More than Efficient
With the high-capacity battery, a simple 3 hour charge allows for more than 5.000 cycles or over 250 hours in standby mode.
The new 14 segment E-ink charge status display along with new electronics and rechargeable Li-Ion technology guarantee an optimal autonomy and consumption of the battery.
Charge the batteries with the Multiple Charger that’s compatible with the C5 and C6 lifting clamps’ batteries. The Multiple Charger can charge up to ten batteries simultaneously.
Open and close the C5 & C6 clamps or receive real-time information of weight battery level, and other values of the lifting and manoeuvring operation.
Just like the rest of our lifting products, the automatic lifting clamps can be paired to any of our remote controls.
Ideal for lifting and transferring steel plates, beams or pipes in a secure and safe matter, minimising risks, enhancing safety and increasing productivity in all your lifting operations.
For horizontal lifting and moving of steel and concrete pipes. Thanks to the automatic release feature, the unloading operation is twice as fast, improving productivity. The pipe lifting clamp must always be used in pairs. The Working Load Limit indicated is per lifting clamp.
Plate Lifting Clamp
For horizontal lifting and moving of steel plates. The clamp’s flat tip effectively inserts into small clearances, securing the load before each lift. This plate lifting clamp must always be used in pairs (or multiples). The Working Load Limit indicated is per lifting clamp.
For horizontal lifting and transportation of steel (H) beams. Replace the tip with tip for beams to lift beams safely and securely. The beam lifting clamp must always be used in pairs. The Working Load Limit indicated is per lifting clamp.
See them in Action!
Safety Tests with Steel Plates
Steel Pipes Lifting
Automatic Release Feature
The NEO50 & NEO60 lifting hooks certify with the following regulatory standards:
|ASME B30.10-2009 (C5)||UNE-EN 60204-1:2007||D89/391/EEC|
|ASME B30.20-2010 (C5)||UNE-EN 61000-6-4:2007||D89/654/EEC|
|UNE-EN 1050||UNE-EN 61000-6-2:2006||D89/655/EEC|
|UNE-EN 13155:2004 + A2||UNE-EN ISO12100:2012||D89/656/EEC|
|UNE-EN 13155 (C6||EN 10204 3.1.B||D92/58/EEC 9a|
Directive on Machine Safety (D2006/42/EC).
EMC Directive (2014/30/EU).
Low Voltage Directive (2014/35/EU).
Radio Equipment Directive (2014/53/EU).
Assurance of Production Quality in accordance with ISO9001.
ARIB Construction Design Certification Number 203-JN0689.
FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.
Each mechanism is delivered with the CE stamp and a declaration of CE conformity.
elebia is a member of F.E.M. (European Federation of Materials Handling).