• Shoring-Platform-wide-slider-2
  • Shoring-Platform-wide-slider-1


The BTRENCHSAFE® Access/Egress Shoring Platform and Telescopic Walkway provides multiple users with a safe means of access and egress to and from the ground excavation and allowing users a safe 3-points of contact at all times.

The use of this equipment in some Australian Territories, States or work places may require documented training from a Registered Training Organization (RTO) therefore BTS recommends that you discuss with your local regulatory authority what qualifications are required before using the system.

The system is designed to be mounted on the top edge of a shoring system (aluminium or steel) which is capable of safely supporting the weight of the system plus all static and dynamic loads that may be applied to the system during use.
There must be enough of the top edge of the shoring structure exposed to allow the platform to be secured using the clamp screws. The Shoring Platform also requires that there is enough width between the shoring box struts to allow the access ladder to sit at a suitable angle (as per industry guidelines, an angle of 4:1 is preferred unless the system has been set up to use the ladder vertically)

 Certifications:

All products comply to relevant Australian Standards including AS1657 and relevant Codes of Practice. Products are also certified by a RPEQ for use within QLD.

  • BRENCHSAFE Access egress shoring Platform

BTRENCHSAFE® Access/Egress Platform

BTS Product Code: BTS6928-LP

FEATURES:

  • Manufactured in lightweight ultra strong aluminium grade T6061 in natural finish.
  • Non slip grid mesh floor construction with enlarged profile to minimize build-up of dirt and soil.
  • Removable handrails on two sides.
  • Self closing gate.
  • Secondary safety bar near excavation side for access and egress.
    To suit panel widths up to 250mm.
  • Built-in ladder support bracket for safely securing vertical ladders onto platform.
  • Extension ladder can be mounted on side or face of shoring panel (with bumpers to prevent ladder from pushing inwards into panel when in use and at the same time also allows for a greater area of foot contact when ascending/descending on the ladder).

Optional fall arrest post complete with inertia reel to allow for personal fall arrest system when entering 3mtr+ ground excavations. No need for additional and costly ladder cage to meet Codes of Practices for Excavation Works.

  • BTRENCHSAFE 1.2 to 2m Walkway

BTRENCHSAFE® Telescopic Walkway 1.2 to 2.0 metre

BTS Product Code: BTS6928-TW

FEATURES:

  • Manufactured in lightweight ultra strong aluminium grade T6061 in natural finish.
  • Non slip grid mesh floor construction with enlarged profile to minimize build-up of dirt and soil.
  • Removable handrails on two sides
  • Adjustable length of 1,240mm to 2,060mm and can be adjusted to a max of 30° for access/egress of platform.

BTS6928-TW13A 3 to 4 metre Walkway

BTRENCHSAFE® Telescopic Walkway 3.0 to 4.0 metre

Code: BTS6928-TW13A

FEATURES:

  • Manufactured in lightweight ultra strong aluminium grade 6061-T6 in natural finish.
  • Non slip grid mesh floor construction with enlarged profile to minimise build-up of dirt and soil.
  • Removable guardrails on two sides.
  • Top and side lifting points.

BTS6928-TW17A4.3 to 5.2 metre Walkway

BTRENCHSAFE® Telescopic Walkway 4.3 to 5.2 metre

Code: BTS6928-TW17A

FEATURES:

  • Manufactured in lightweight ultra strong aluminium grade 6061-T6 in natural finish.
  • Non slip grid mesh floor construction with enlarged profile to minimise build-up of dirt and soil.
  • Removable guardrails on two sides.
  • Top and side lifting points.

BTS6928-TW20A5.2 to 6.0 metre Walkway

BTRENCHSAFE® Telescopic Walkway 5.2 to 6.0 metre

Code: BTS6928-TW20A

FEATURES:

  • Manufactured in lightweight ultra strong aluminium grade 6061-T6 in natural finish.
  • Non slip grid mesh floor construction with enlarged profile to minimise build-up of dirt and soil.
  • Removable guardrails on two sides.
  • Top and side lifting points.

Optional

BTRENCHSAFE® Fall Arrest Post Kit

The BTRENCHSAFE® Fall Arrest Post Kit consists of an engineered and rated fall arrest post that is designed to slot into either side of the BTRENCHSAFE® Access/Egress Shoring Platform, 9mtr inertia reel (x1), safety harness (x1) and safety bunting dropper line all supplied within a rugged hard wearing black canvas bag. The Kit is designed to be used in conjunction with the BTRENCHSAFE® Access/Egress Shoring Platform to allow sites to be compliant with 2014 Safe Work Australia Codes of Practice for Excavations and also 2013 Codes of Practice for Managing the Risks of Falls in Workplace by having an appropriate fall arrest system in place whilst accessing ground excavations.

BTS Product Code: BTS6928-LP-EP

  • Fall Arrest Post Kit

Certifications:

All products comply to relevant Australian Standards including AS/NZS1891 (parts 1 & 4), AS/NZS 5532, and relevant Codes of Practice. Products are also certified by a RPEQ for use within Queensland.

More Info

Project details